High End Audio Store NYC
You have no items in your shopping cart.
Close
Filters
Search

Concept Wood Turntable

Item # CA-CONCEPTW
test
*
$2,200.00
+ -

The Concept Wood turntable furthers the sonic excellence of the award-winning Concept turntable. The Concept Wood uses a baltic birch, constrained layer plinth that is both visually attractive and sonically rich and smooth. The aluminum machined sub-platter and rear-mounted fine speed adjustments are an upgrade from the original Concept design. The Concept Wood is equipped with the Satisfy Black tonearm, which features a 3-point mechanical bearing, magnetic anti-skate, and hard-wired tonearm cable. You can upgrade to the Satisfy Carbon Fiber tonearm for enhanced musicality and imaging. A high-quality Clearaudio moving magnet (Concept MM) or moving coil (Concept MC) cartridge can be pre-mounted to complete this setup. The Concept is belt-driven by a low-noise, decoupled DC motor built into the baltic birch plinth. The platter is made of 30mm-thick polymer (POM), an engineering thermoplastic with a weighted rim for increased fly-wheel effect, providing greater speed stability. The Concept Wood plays at three speeds – 33rpm, 45rpm, and 78rpm – selectable by an Electronic Speed Control knob.

  • Made in Germany
  • Constrained-layer Baltic Birch plinth
  • 2-piece 30mm-thick POM platter
  • Polished tempered steel bearing shaft within sintered bronze bushings
  • Mirror polished teflon thrust pad
  • Belt-driven by a decoupled DC motor
  • 33, 45 and 78 rpm at a turn of a dial
  • Optional factory mounted and aligned MM or MC phono cartridge
  • The Clearaudio Satisfy Carbon Fiber tonearm is also available for an additional $200

    This product qualifies for Free Shipping and 5% back when you register for Club Ciamara Membership Rewards Program

Need Help?
Send an email or Call 1.844.CIAMARA
Products specifications
Height (In) 5.5
Width (In) 13.8
Length (In) 16.5

The Concept Wood turntable furthers the sonic excellence of the award-winning Concept turntable. The Concept Wood uses a baltic birch, constrained layer plinth that is both visually attractive and sonically rich and smooth. The aluminum machined sub-platter and rear-mounted fine speed adjustments are an upgrade from the original Concept design. The Concept Wood is equipped with the Satisfy Black tonearm, which features a 3-point mechanical bearing, magnetic anti-skate, and hard-wired tonearm cable. You can upgrade to the Satisfy Carbon Fiber tonearm for enhanced musicality and imaging. A high-quality Clearaudio moving magnet (Concept MM) or moving coil (Concept MC) cartridge can be pre-mounted to complete this setup. The Concept is belt-driven by a low-noise, decoupled DC motor built into the baltic birch plinth. The platter is made of 30mm-thick polymer (POM), an engineering thermoplastic with a weighted rim for increased fly-wheel effect, providing greater speed stability. The Concept Wood plays at three speeds – 33rpm, 45rpm, and 78rpm – selectable by an Electronic Speed Control knob.

  • Made in Germany
  • Constrained-layer Baltic Birch plinth
  • 2-piece 30mm-thick POM platter
  • Polished tempered steel bearing shaft within sintered bronze bushings
  • Mirror polished teflon thrust pad
  • Belt-driven by a decoupled DC motor
  • 33, 45 and 78 rpm at a turn of a dial
  • Optional factory mounted and aligned MM or MC phono cartridge
  • The Clearaudio Satisfy Carbon Fiber tonearm is also available for an additional $200

    This product qualifies for Free Shipping and 5% back when you register for Club Ciamara Membership Rewards Program

  • Clearaudio Concept Wood turntable with Satisfy Black tonearm and factory-installed Concept v2 MM phono cartridge: $2,400 (save $50)
  • Clearaudio Concept Wood turntable with Satisfy Black tonearm and factory-installed Concept MC phono cartridge: $3,000 (save $200)
  • Speed ranges: 33 1/3, 45, and 78 RPM, Electronic Speed Change
  • Motor: Decoupled DC motor with low-noise bearings
  • Bearing: Polished and tempered steel shaft in a sintered bronze bushing, runs on a mirror of Teflon
  • Platter: CNC-machined POM (polyoxymethylene), 30 mm thickness
  • Speed accuracy: +- 0.04 %
  • Weight: 16.5 lbs
  • Dimensions: 16.54″ x 13.78″ x 5.51″
  • Warranty: 2 years
  • Products specifications
    Height (In) 5.5
    Width (In) 13.8
    Length (In) 16.5