High End Audio Store NYC
You have no items in your shopping cart.
Close
Filters
Search

Concept Wood Turntable PACKAGE SPECIAL (SAVE $400)

Item # CA-CONCEPTW-SB-MAE
test
$3,000.00
+ -

Clearaudio Concept Wood Package Special:  

Special limited-time package of Concept Wood turntable with Satisfy Black tonearm and factory pre-mounted

Maestro V2 cartridge for only $3,000. Save $400 as this package retails for $3,400

The Concept Wood turntable furthers the sonic excellence of the award-winning Concept turntable. The Concept Wood uses a baltic birch, constrained layer plinth that is both visually attractive and sonically rich and smooth. The aluminum machined sub-platter  and rear-mounted fine speed adjustments are an upgrade from the original Concept design. The Concept Wood is equipped with the Satisfy Black tonearm, which features a 3-point mechanical bearing, magnetic anti-skate, and hard-wired tonearm cable. The Concept is belt-driven by a low-noise, decoupled DC motor built into the baltic birch plinth. The platter is made of 30mm-thick polymer (POM), an engineering thermoplastic with a weighted rim for increased fly-wheel effect, providing greater speed stability. The Concept Wood plays at three speeds – 33rpm, 45rpm, and 78rpm – selectable by an Electronic Speed Control knob.

Product Highlights

  • Made in Germany
  • Constrained-layer Baltic Birch plinth
  • 2-piece 30mm-thick POM platter
  • Polished tempered steel bearing shaft within sintered bronze bushings
  • Mirror polished teflon thrust pad
  • Belt-driven by a decoupled DC motor
  • 33, 45 and 78 rpm at a turn of a dial
  • Factory mounted and aligned Maestro V2 Ebony phono cartridge

This product qualifies for Free Shipping and 5% back when you register for Club Ciamara Membership Rewards Program

Need Help?
Send an email or Call 1.844.CIAMARA
Products specifications
Height (In) 5.5
Width (In) 13.8
Length (In) 16.5

Clearaudio Concept Wood Package Special:  

Special limited-time package of Concept Wood turntable with Satisfy Black tonearm and factory pre-mounted

Maestro V2 cartridge for only $3,000. Save $400 as this package retails for $3,400

The Concept Wood turntable furthers the sonic excellence of the award-winning Concept turntable. The Concept Wood uses a baltic birch, constrained layer plinth that is both visually attractive and sonically rich and smooth. The aluminum machined sub-platter  and rear-mounted fine speed adjustments are an upgrade from the original Concept design. The Concept Wood is equipped with the Satisfy Black tonearm, which features a 3-point mechanical bearing, magnetic anti-skate, and hard-wired tonearm cable. The Concept is belt-driven by a low-noise, decoupled DC motor built into the baltic birch plinth. The platter is made of 30mm-thick polymer (POM), an engineering thermoplastic with a weighted rim for increased fly-wheel effect, providing greater speed stability. The Concept Wood plays at three speeds – 33rpm, 45rpm, and 78rpm – selectable by an Electronic Speed Control knob.

Product Highlights

  • Made in Germany
  • Constrained-layer Baltic Birch plinth
  • 2-piece 30mm-thick POM platter
  • Polished tempered steel bearing shaft within sintered bronze bushings
  • Mirror polished teflon thrust pad
  • Belt-driven by a decoupled DC motor
  • 33, 45 and 78 rpm at a turn of a dial
  • Factory mounted and aligned Maestro V2 Ebony phono cartridge

This product qualifies for Free Shipping and 5% back when you register for Club Ciamara Membership Rewards Program

Concept Wood Turntable

Speed ranges

33 1/3, 45, and 78 RPM, Electronic Speed Change

Motor

Decoupled DC motor with low-noise bearings

Bearing

Polished and tempered steel shaft in a sintered bronze bushing, runs on a mirror of Teflon

Platter

CNC-machined POM (polyoxymethylene), 30 mm thickness

Speed accuracy   

+- 0.04 %

Weight

16.5 lbs

Dimensions

16.54″ x 13.78″ x 5.51″

Warranty

2 years

Maestro V2 Ebony Cartridge

Frequency Response

20Hz – 20 kHz

Output Voltage 5cm/sec

3.6 mV

Channel Separation

> 30 dB

Channel Balance

< .2 dB

Tracking Ability

90 µm

Recommended Tracking Force     

2.2 g ± .3 g

Coil Impedance

.66 kΩ

Coil Inductance

.42 H

Load Resistance

47 kΩ

Load Capacitance

100 pF

Cantilever

Boron / HD Diamond

Stylus Shape

Micro HD

Compliance

15

Weight

8.4 g

Warranty

2 years


Products specifications
Height (In) 5.5
Width (In) 13.8
Length (In) 16.5