You have no items in your shopping cart.

conections: clocks


Connections for Antelope Isochrone Trinity and 10M Clocks

This tutorial assumes you are using the Antelope Isochrone Trinity and OCX clocking units pictured below.  Please be advised that the Trinity and 10M are designed primarily for the professional studio environment.  If you intend to use these in a home/listening setup, changing sample rates must be done manually.  This is not for the faint of heart.  If you are not comfortable with this manual process, please contact us for a suitable alternative solution.

The Trinity has 3 clocks that correspond to Audio A, Audio B and Audio C. For basic operation, simply use the Audio A section. Connect a BNC cable to one of the Audio A Outs, as shown below. If slaving multiple devices, you can connect up to 8 devices via BNC.

Next, connect the Atomic Input on the back of the Antelope Trinity (first photo below) to one of the Outs (e.g. OUT 1) on the back of the 10M, if present (second photo below).

When using Antelope clocks, the sample rate must be set manually. Follow these simple steps, as pictured below:

  • Press the Audio A button to the left of the LED readout (Photo A)
  • The LED readout will change format (Photo B)
  • Turn the Sample Rate knob clockwise or counterclockwise to find your desired sample rate (Photos C and D)
  • Push and release the Sample Rate knob, and your new sample rate will be stored (Photos E and F)

Photo A

Photo B

Photo C

Photo D

Photo E

Photo F